Double Glazing Door Lock Repairs
Are you experiencing issues with your uPVC door or window mechanism broken? Perhaps the handles on your uPVC windows or doors aren't aligned properly or are difficult to use.
You'll lose energy when your double-glazed doors do not perform as they should. This also increases the risk of burglary. Owen the Locksmith can fix your door lock at an affordable price.
Snapped Key
If a key is snapped off within a lock, it can be incredibly frustrating. It could also be a security issue because it could leave you vulnerable to an intruder if the door does not lock. There are fortunately simple fixes you can attempt to fix the problem and get your door functioning properly once more.
First, remember to stay calm. If you panic and start playing around with your keys, you might just end up pushing the damaged piece of the key deeper into the lock, which could make the situation even more difficult.
Spray WD-40 or another penetrating lubricant, into the lock. This will allow the broken piece to emerge more easily. You can also use the screwdriver to break any pieces that are stuck. If you have a piece of the key that is still sticking out then grab it using the help of a paperclip or any other thin metal object and pull it. Both methods work well, however, be careful not to push the damaged piece of the key even further into the keyway.
Some paperclips have grooved edges, which can work in a pinch as hook extractors, and some Jigsaw blades also work for this use. If you don't have any of them handy, you can make use of needle-nose pliers to bend them and create a hook. You can also use a pair tweezers to grasp and pull out the last bit of the broken keys.
If you can't get the broken piece of key out, try using a lock de-icer. It is available at all hardware stores, and it is used to freeze any water or ice that could be in the lock.
If none of these tricks seem to be helping you, it's time to call locksmith. Fitlocks experts can quickly solve problems with uPVC door mechanisms and locks, including snapped keys and broken handles. They can also modify your double glazing door mechanisms to allow them to operate more easily. Get a double glazing repair via our website or give us a call to discuss your needs.
Broken Cylinder
A damaged cylinder could pose an extremely risky security issue. A professional locksmith can easily repair the cylinder. Locksmiths will need to tap the cylinder in order to repair it. This can be done using the hammer or other tool. The best method is to make use of a wire or a long match. Place the match or wire end near the keyway. After that, the locksmith will hit the lock to break it open. This is better than using the hammer, which could harm the lock.
Overheating is the primary reason for cylinder heads to crack. This can happen when the cylinder block as well as the cylinder head are made of various metals, including cast iron and aluminium. Different metals can be heated and cool at different rates. This can cause localised hotspots to expand quicker than the rest of the cylinder.
Another possible cause for cylinder cracks is corrosion. If the cylinder block and head are not maintained correctly they may be corroded or rust and cause them to expand faster than anticipated. Over time, this can cause cracks.
If your uPVC window lock or door is brittle or requires lots of pressure to turn, it can be the result of many things. This issue could be caused by a malfunctioning locking mechanism or misalignment as well as a worn-out handle.
Fortunately it is a simple and inexpensive fix for most double glazing owners. A professional locksmith is able to fix this problem within one hour of arriving at the property. They can replace the locking mechanisms, or change the window handles, and also change the gearboxes based on your specific needs. A locksmith with experience can always advise you on the most cost-effective solution for your home. They can recommend upgrading to 3 Star TS007 Euro Cylinders, which provide an additional layer of protection from burglars. It is a small cost to enjoy the peace of mind that comes from knowing that your uPVC door is secured.
Broken Handle
Window handle locks have intricate mechanisms that deteriorate with age and usage, so it's no surprise they occasionally break. It isn't always easy to pinpoint the reason for the problem and repair it correctly.
Fixing your broken handle, regardless of whether it's the internal latch or locking mechanism, will improve the security of your uPVC door and stop draughts. When you aren't doing it right, replacing or repairing the handle could be expensive and could harm the door's frame as well as lock, so it's worth taking some time to do it right.
Screwdriver Open the window and the screw loose, loosen the handle. This should be located on the inside of the back plate, and is normally concealed by an attractive cover for the screw for aesthetic reasons. Be careful not to lose any of the internal parts within the handle, such as the levers or plates on either side of the spindle. Keep them in the same order to make it simpler to replace them in the event of a need.
Then, turn the handle so it's at 90 degrees to the window frame. Finally, loosen the screw at the back of the handle which holds it to the internal spindle with another screwdriver. Once the screw is loose, you can take the handle off and take the broken spindle out. Replace it with a brand new one, making sure it is the same length as the old one (you will typically find them on the internet or in hardware stores) and securely screw it in the right place. Don't over tighten the screw as this could harm the handle as well as the window frame.
Check that the new handle is installed, then close and test the handle. The hope is that it will function smoothly and you'll be able to unlock your window.
Make sure to check that your uPVC window is closing properly when you're working with the handle. If they don't cause damp and draughts in your home, as in addition to compromising your home's energy efficiency. Core Sash Windows is a local window company that can alter the hinges on the frames of your windows to ensure that they shut correctly.
Broken Spindle
It is usually the case that the spindle inside the handle is broken, not the handle itself. This is especially common with uPVC tilt-and-turn windows. These windows require a handle that operates a locking device in the window frame. The handle is attached to a central rod which triggers a set of cams that resemble mushrooms, which secure the frame of the window. If the dead latch mechanism fails to open when the handle is turned it is likely that the spindle has been damaged This can be an extremely frustrating issue.
There are ways to fix this problem. A good locksmith will be able to quickly and effectively fix this issue. They will be able to remove the window handle using a tool to remove the wheel part of the mechanism, where the spindle goes. This can be done without damage to the handle or the window frame.
After removing the wheel the technician can examine the spindle and identify the cause of the break. This involves breaking the spindle into its component parts and meticulously noting their general condition, as in addition to any specific areas of wear or damage. This process is usually carried out by technicians working in an environment that is clean.
Next, clean the damaged spindle. This will help get rid of any dirt or other debris that might be preventing it from operating normally. Following this the spindle can be repaired or replaced. If the technician is replacing the spindle, it is possible to use a dowel that is similar in size to the original. He will then drill holes that are identical to both pieces. This will ensure that the new spindle has a precise fit with the handle.
If the spindle that is damaged is beyond repair, it may be required to replace it completely. Home centers sell generic replacements. However, if the style of your window is rare then it is necessary to speak with a woodworker or cabinet maker who can duplicate the exact model for you. Once the new spindle is in place it can be positioned to the handle by line up the screw holes in the handle with the frame's existing screws. Once the handle is securely in place, you can use your uPVC windows.